Program

Scientific Program


08:00 – 08:45

REGISTRATION

08:45 – 09:00

CONFERENCE OPENING CEREMONY  ▶  Salón de Grados

09:00-09:30

RATIONALISING THE EFFECT OF TEST PARAMETERS IN GROSS-SLIP FRETTING WEAR TESTING – ILLUSTRATIONS FROM THE FRETTING OF STEEL CONTACTS

AUTHOR
PHILIP SHIPWAY


SESSION 1

EXPERIMENTAL RESULTS IN FRETTING FATIGUE/WEAR           ▶ SALA DE JUNTAS


09:30-09:50

A NOVEL ACCELERATION CONTROLLED RANDOM VIBRATION FRETTING TEST METHODOLOGY: FROM CLASSICAL SINE TO GAUSSIAN RANDOM PROCESSES

AUTHORS
ALIX – HELMI – GARY


09:50-10:10

FRETTING WEAR EXPERIMENTAL ANALYSIS OF A R3 OFFSHORE STEEL AGAINST A PC/ABS BLEND

AUTHORS

PANDIM  – DOCA – ANDRADE PIRES


10:10-10:30

STUDY ON THE DAMAGE MECHANISM OF TORSIONAL FRETTING FATIGUE

AUTHORS
PENG – WANG – XU – CAI – WEN – ZHU


10:30-10:50

FRETTING CORROSION BEHAVIOR BETWEEN ALLOY 690 AND ITS SUPPORTING MATERIALS IN STEAM
GENERATOR IN PWR

AUTHORS
MING – LIU – WANG – ZHANG – HAN


PARELLEL SESSION 1

PALLIATIVES AGAINST FRETTING FATIGUE/WEAR          ▶ SALA DE GRADOS


09:30-09:50

IMPROVEMENT OF FRETTING FATIGUE STRENGTH OF SPLINED SHAFT BY COMBINATION OF PRESS FITTING

AUTHORS
KUBOTA – MIWA


09:50-10:10

WEAR RESISTANCE OF STEELS AFTER COMBINED LASER THERMAL AND SHOCK-WAVE HARDENING

AUTHORS
BRAGOV – LAMZIN – LITVINCHUK – LOMUNOV – RUSIN


10:10-10:30

EFFECTS OF SHOT PEENING ON THE FRETTING FATIGUE BEHAVIOUR OF AL 7075-T651

AUTHORS

MARTÍN – VÁZQUEZ – NAVARRO – DOMÍNGUEZ


10:30-10:50

VOIDS AS STRESS RELIEVERS IN A SHRINK-FITTED SHAFT

AUTHORS
ERENA – VÁZQUEZ – NAVARRO – DOMÍNGUEZ


10:50-11:20

COFFEE BREAK

SESSION 2

MODELLING IN FRETTING FATIGUE/WEAR           ▶ SALA DE JUNTAS


11:20-11:40

A REVIEW OF PARTIAL SLIP SOLUTIONS FOR CONTACTS REPRESENTED BY HALF-PLANES

AUTHORS
HILLS – ANDRESEN,


11:40-12:00

FATIGUE OF TWO CONTACTING WIRES OF THE ACSR IBIS 397.5 MCM CONDUCTOR: EXPERIMENTS AND LIFE PREDICTION

AUTHORS
ROCHA – DIAZ – SILVA – ARAÚJO – FERREIRA – CASTRO


12:00-12:20

FRETTING FATIGUE CRACK PATH AND LIFETIME ESTIMATION IN AL7075 ALUMINIUM ALLOY

AUTHORS
ZANICHELLI – CARPINTERI – VANTADORI


12:20-12:40

A DAMAGE MODEL FOR FRETTING USING SEMI-ANALYTICAL METHOD

AUTHORS
BEYER – CHAISE – LEROUX – NELIAS


PARELLEL SESSION 2

EXPERIMENTAL RESULTS IN FRETTING FATIGUE/WEAR           ▶ SALA DE GRADOS


11:20-11:40

ANALYSIS OF COEFFICIENT OF FRICTION DERIVATION METHODS FOR FRETTING FATIGUE IN THIN STEEL WIRES

AUTHORS
GARATE – ZABALA – GÓMEZ – AGINAGALDE – TATO – LLAVORI


11:40-12:00

EXPERIMENTALLY ANALYZING WEAR RESISTANCE OF COMPACTED FINE-DISPERSED IRON POWDER AND WOLFRAM MONOCARBIDE NANO-POWDER PRODUCED BY IMPULSE COMPACTION

AUTHORS
IGUMNOV – BRAGOV – KONSTANTINOV – LOMUNOV – RUSIN


12:00-12:20

FORMATION AND CHARACTERIZATION OF CRACKS AND DEGRADATION LAYERS IN LARGE FLAT-ON-FLAT FRETTING CONTACT

AUTHORS
JUOKSUKANGAS – NURMI – HINTIKKA – MÄNTYLÄ – LEHTOVAARA – VIPPOLA – HONKANEN – VAARA – FRONDELIU


12:20-12:40

EFFECT OF VELOCITY ON THE IMPACT- SLIDING FRETTING WEAR BEHAVIOR OF 304 STAINLESS STEEL

AUTHORS
YIN – CAI – YU – PENG – ZHU


13:00-14:30

LUNCH

SESSION 3

MODELLING IN FRETTING FATIGUE/WEAR           ▶ SALA DE JUNTAS


14:30-14:50

A MACHINE LEARNING APPROACH TO THE PREDICTION OF FRETTING FATIGUE LIFE

AUTHOR
NOWELL


14:50-15:10

 NUMERICAL CORRELATION BETWEEN ACOUSTIC EMISSION AND FRETTING REGIME TRANSITION

AUTHORS
WADE – CLARKE – COPLEY – AL SHEIKH OMAR – BRYANT – LISKIEWICZ


15:10-15:30

INVESTIGATION OF EARLY CRACK ORIENTATION IN 7050-T7451 ALUMINUM ALLOY UNDER FRETTING CONDITIONS

AUTHORS
ALMEIDA – CASTRO – ARAÚJO – CARDOSO


15:30-15:50

CRYSTAL PLASTICITY FINITE ELEMENT MODELLING OF MICROSTRUCTURE EFFECTS IN FRETTING FATIGUE FOR FLEXIBLE MARINE RISERS

AUTHORS
ASHTON – HARTE – O’HALLORAN – LEEN


PARELLEL SESSION 3

APPLICATIONS AND CASE STUDIES           ▶ SALA DE GRADOS

 


14:30-14:50

EFFECT OF AMPLITUDE AND CURRENT DENSITY ON THE BENDING FRETTING FATIGUE LIFE OF INTEGRAL DROPPERS USED IN HIGH SPEED RAILWAY CATENARY SYSTEM

AUTHORS
LIU – PENG – XUE – ZHANG – LIU – ZHU


14:50-15:10

FRETTING IN NUCLEAR POWER SYSTEMS : A REVIEW

AUTHORS
CAI – ZHU


15:10-15:30

A GLOBAL-LOCAL FRETTING ANALYSIS METHODOLOGY AND DESIGN STUDY FOR THE PRESSURE ARMOUR LAYER OF DYNAMIC FLEXIBLE MARINE RISERS

AUTHORS
LEEN, SEAN – O’HALLORAN, S.M. – HARTE, A.M. – CONNAIRE, A.D.


15:30-15:50

FRETTING FATIGUE ANALYSIS OF FULL-SCALE RAILWAY AXLE IN PRESENCE OF THE ARTIFICIAL MICRO-NOTCHES

AUTHOR
POURHEIDAR


16:10-16:40

COFFEE BREAK

SESSION 4

MODELLING IN FRETTING FATIGUE/WEAR           ▶ SALA DE JUNTAS


16:40-17:00

AN EXPERIMENTAL AND NUMERICAL MULTI-SCALE APPROACH TO PREDICT THE FRETTING-FATIGUE LIFE OF OVERHEAD CONDUCTORS

AUTHORS
JULIEN – SIMON – SIEGFRIED – CHRISTINE – FIKRI


17:00-17:20

 FRETTING FATIGUE UNDER VARIABLE AMPLITUDE LOADING, PART 1: NUMERICAL ANALYSIS

AUTHORS
PINTO – ARAÚJO – TALEMI – CARDOSO


17:20-17:40

 PRELIMINARY STUDY ON THE USE OF THE THEORY OF CRITICAL DISTANCES WITH MESH CONTROL FOR FRETTING FATIGUE LIFE ESTIMATION

AUTHORS
ZABALA – INFANTE-GARCIA – GINER – GOEL – ENDRINO – LLAVORI,


PARELLEL SESSION 4

EXPERIMENTAL RESULTS IN FRETTING FATIGUE/WEAR           ▶ SALA DE GRADOS


16:40-17:00

FRETTING WEAR BEHAVIOUR OF COBALT-BASED SUPERALLOYS AT HIGH TEMPERATURE–A COMPARATIVE STUDY

AUTHORS
KORASHY – ATTIA – THOMSON – OSKOOEI


17:00-17:20

STUDY OF SIZE EFFECTS IN FRETTING FATIGUE

AUTHOR
ARAUJO


17:20-17:40

 FRETTING AMPLITUDE MAP OF MARTENSITIC STAINLESS STEELS

AUTHORS
LAVELLA – BOTTO

09:00-09:30

SURFACE DESIGN AGAINST THIRD BODY FRETTING-CORROSION OF ELECTRICAL CONNECTORS

AUTHOR
TOMASZ LISKIEWICZ


SESSION 5

EXPERIMENTAL RESULTS IN FRETTING FATIGUE/WEAR           ▶ SALA DE JUNTAS


09:30-09:50

AN EXPERIMENTAL INVESTIGATION OF THE FRETTING FATIGUE STRENGTH UNDER CONDITIONS OF VARYING NORMAL LOAD

AUTHORS
BLADES – PAYNTER – ANDRESEN – WORMSEN


09:50-10:10

MEASUREMENT OF HYSTERESIS LOOPS IN FRETTING WEAR

AUTHORS
FANTETTI – SCHWINGSHACKL – NOWELL


10:10-10:30

CHARACTERIZATION OF CONTACT ZONE AND WEAR IN FRETTING FATIGUE WITH A CONFOCAL MICROSCOPE

AUTHORS
JORDANO – NAVARRO – VÁZQUEZ – DOMÍNGUEZ


10:30-10:50

RUNNING-IN IN FRETTING, TRANSITION FROM NEAR STABLE FRICTION REGIME TO GROSS SLIDING

AUTHORS
HINTIKKA – MÄNTYLÄ – VAARA – FRONDELIUS – LEHTOVAARA


PARELLEL SESSION 5

THEORIES AND MECHANISMS OF FRETTING FATIGUE/WEAR           ▶ SALA DE GRADOS


09:30-09:50

ROLE OF OXIDE FILM ON THE FRETTING WEAR RESISTANCE OF A NUCLEAR FUEL ROD

AUTHORS
LEE – KIM – KIM


09:50-10:10

MICRO-PILLAR ANALYSIS OF DEBRIS LAYER IN RELATION TO FRETTING WEAR RESPONSE OF HS25 COBALT-BASED SUPERALLOY AT HIGH TEMPERATURES

AUTHORS
A VIAT – G. GUILLONNEAU – S. FOUVRY – G. KERMOUCHE – J. F. HENNE.


10:10-10:30

WEAR MECHANISM OF FRETTED COMOCRSI COATINGS

AUTHORS
LAVELLA – BOTTO


10:30-10:50

CHARACTERIZATION OF THE FRETTING FATIGUE DAMAGE OF STAINLESS STEEL AT HIGH TEMPERATURE

AUTHOR
ATTIA


10:50-11:20

COFFEE BREAK

SESSION 6

PALLIATIVES AGAINST FRETTING FATIGUE/WEAR           ▶ SALA DE JUNTAS


11:20-11:40

COMPARING THE PERFORMANCE OF PLASMA SPRAYED CU-NI-IN AND COCRALYSI – HBN COATINGS UNDER FRETTING WEAR CONDITIONS

AUTHORS
SEELAMANTHULA – S – G


11:40-12:00

EFFECT OF SURFACE TREATMENT ON FRETTING FATIGUE STRENGTH OF PREMIUM THREADED CONNECTION

AUTHORS
OKU – ANDO – SUGINO – HOSOI – TAKAZAKI – KUBOTA


12:00-12:20

FRETTING WEAR AND FATIGUE BEHAVIORS OF BIAS-GRADED GRAPHITE-LIKE CARBON FILMS

AUTHORS
SHI – LISKIEWICZ – BEAKE – CHEN – SUN


12:20-12:40

AN EXPERIMENTAL INVESTIGATION OF THE ENDURANCE OF FRETTING PALLIATIVES

AUTHORS
BLADES – PAYNTER – ANDRESEN – WORMSEN


12:40-13:00

ROOM AND ELEVATED TEMPERATURE FRETTING WEAR BEHAVIOR OF PLASMA ELECTROLYTIC OXIDATION COATED TI6AL4V SAMPLES IN DIFFERENT ELECTROLYTE SOLUTIONS

AUTHORS
SINGH – S – L – G


PARELLEL SESSION 6

MODELLING IN FRETTING FATIGUE/WEAR           ▶ SALA DE GRADOS


11:20-11:40

INFLUENCE OF FRETTING WEAR ON BLADED-DISKS DYNAMIC ANALYSIS

AUTHORS
LEMOINE – NELIAS – THOUVEREZ – VINCENT


11:40-12:00

WEAR NUMERICAL ASSESSMENT FOR PARTIAL SLIP FRETTING FATIGUE CONDITIONS

AUTHORS
ARAUJO CARDOSO – DOCA – ALEXANDER ARAÚJO – POMMIER – NÉRON


12:00-12:20

AN IDEALISED DESCRIPTION OF THE FRICTIONAL RECEDING CONTACT BEHAVIOUR OF A BOLTED JOINT SUBJECTED TO SHEAR LOADING

AUTHORS
DA PONTE LOPES – HILLS


12:20-12:40

PREDICTION OF CRACK PATHS USING THE MINIMUM SHEAR STRESS RANGE UNDER FRETTING CONDITIONS WITH INCOMPLETE CONTACT CONFIGURATION

AUTHORS
INFANTE-GARCÍA – LLAVORI – ZABALA – GINER


12:40-13:00

EFFECTS OF HYDROGEN POROSITIES ON FRETTING FATIGUE BEHAVIOUR OF ALUMINIUM ALSI10MG: A NUMERICAL STUDY

AUTHOR
TALEMI


13:00-14:30

LUNCH

SESSION 7

MODELLING IN FRETTING FATIGUE/WEAR           ▶ SALÓN DE GRADOS


09:30-09:50

MODELLING OF FRETTING FATIGUE ENDURANCE FROM PARTIAL TO GROSS SLIP: EFFECT OF DEBRIS LAYER

AUTHORS
ARNAUD – GARCIN – FOUVRY


09:50-10:10

PREDICTION OF CONTACT CONDITION AND SURFACE DAMAGE BY SIMULATING VARIABLE FRICTION COEFFICIENT AND WEAR

AUTHORS
MÄNTYLÄ – HINTIKKA – VAARA – FRONDELIUS – JUOKSUKANGAS – LEHTOVAARA


10:10-10:30

ASSESSMENT OF FRETTING FATIGUE IN HIGH STRENGTH STEEL BOLTED CONNECTIONS WITH SIMPLIFIED FE MODELLING TECHNIQUES.

AUTHORS
VENUGOPAL POOVAKAUD


10:30-10:50

COFFEE BREAK

SESSION 8

MODELLING IN FRETTING FATIGUE/WEAR           ▶ SALA DE GRADOS


10:50-11:20

NUMERICAL SIMULATION OF CRACK NUCLEATION RISK UNDER FRETTING WEAR BY TAKING INTO ACCOUNT THE THIRD BODY LAYER

AUTHORS
GARCIN – ARNAUD – FOUVRY


11:20-11:40

THE GENERALIZED LOCAL MODEL (GLM) AS A METHODOLOGY TO ENHANCE RELIABILITY IN FRETTING FATIGUE LIFETIME PREDICTION

AUTHORS
MUNIZ-CALVENTE – VAZQUEZ – NAVARRO – DOMINGUEZ – FERNANDEZ-CANTELI


11:40-12:00

 MODELLING FRETTING FATIGUE LIFE IN COMPLEX LOADING CONDITIONS

AUTHOR
ROUSSEAU


12:20 – 12:35

CONFERENCE CLOSING CEREMONY   ▶ Salón de Grados

12:30

LUNCH